CADDX Walksnail Avatar HD Pro Kit – 1080P/60FPS Night Vision, Dual Antennas, Low-Latency FPV Drone VTX
- Ultra-Clear 1080P/60FPS with Night Vision
- Stable Long-Range Digital Transmission
- Built-in Gyroflow and 8GB Storage
- Compact and Lightweight with Smart Layout
- Smooth Compatibility with Goggles X & L
$159
Share on:
Bullet Point :
- 1/1.8 inch Sony Starvis Ⅱ sensor, come with extremely clear night vision as long as day vision.
- Support 1080P/120fps high frame, also the first high frame night vision HD camera in FPV market.
- Supporting Gyroflow for more stable and smoother footage.
Bullet Point:
- Add 20*20mm mounting holes for easy installation.
- Add 8g built-in storage option.
- Updated the design of PCB board and outer shell, more durable.
- A spare pad is added to provide two power connection modes.
- Optimized antenna base design and frequency button position for greater convenience.
Bullet Point for Avatar HD Pro Kit:
Features：
- 1080P 120fps compatibility
- High frame starlight
- 22ms low latency
- Ranging Mode
- 4km range
- Light weight design
- FOV160°
- Built-in 8G storage
- 6V-25.2V
- Sony Starvis Ⅱ Technology
The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with ultra-low latency. Support 1080P/60FPS, 720P/120FPS. Featuring a 1/1.8 inch Sony Starvis Ⅱ sensor, this camera delivers excellent night vision that’s just as clear as day.
The camera ( 8G VTX KIT) supports Gyroflow, take you smooth and stable video quality.
VTX Features：
- In addition to the original 25mm x 25mm mounting holes, the kit now includes 20mm x 20mm holes for greater compatibility with a wider range of FPV drone models.
- Updated the design of PCB board and shell, improved the quality of VTX, more durable.
- Optimized the installation place of the antenna, so as to better protect the VTX.
- The position of the frequency binding button has been changed to make the frequency binding operation more convenient.
- A spare pad is added to provide two power connection modes.
New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability and resistance to GPS interference. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.
The Avatar VTX comes with 8g built-in storage it can record 1080p or 720p HD flight videos without interference.
It supports high frame rate and standard frame rate at the same time. Under high frame rate, the average delay is 22ms.
The compact and convenient single-antenna design makes it easier to assemble your FPV drone. The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable.
HD 1080p OLED Dual Micro Displays
| Specification | |
| Camera | |
| Model | Avatar HD Pro Camera |
| Image Sensor | 1/1.8-Inch Sony Starvis Ⅱ Sensor |
| Resolution | 1080P/60fps;720P/120fps,720P/60fps;1080P/120fps compatibility; |
| Ratio | 16/9; 4/3 |
| Lens | 8Mp |
| FOV | 160° |
| Aperture | F1.6 |
| Shutter | Rolling shutter |
| Min.Illumination | 0.00001Lux |
| Weight | 9.5g |
| Dimensions | 19*19*24mm |
| Coaxial Cable | 140mm |
| VTX | |
| Model | Avatar V2 Module |
| Communication Frequency | 5.725-5.850GHz |
| Transmitter Power (EIRP) | FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;MIC:<25dBm |
| 1/O Interface | JST1.0*4(Power in)JST0.8*6(USB) |
| Mounting Holes | 25.5*25.5mm; 20*20mm |
| Dimensions | 33.5*33.5*10.5mm |
| Storage | 8G |
| Recording | 1080p/720p |
| Weight | 17.6g |
| Operating Temperature | -20-40℃ |
| Channels | 8 |
| Wide Power Input | 6V-25.2V |
| Supported FC System | Betaflight; Inav; Fettec; ArduPilot;Kiss |
| OSD | Canvas mode |
| Latency | Average delay 22ms |
| Antenna | 1(IPEX) |
| Avatar V2 Antenna | |
| Polarization | LHCP |
| Frequency range | 5600MHz-6000MHz |
| Gain | 1.9dBi |
| VSWR | ≤1.5 |
| Input Impedance | 50Ω |
| Interface | IPEX-1 |
| Size | R15 X 45mm(without cable) |
| Weight | 2g |
